- TOP
- SUN SERIES
- Neo Tsukuyomi LED 20W BACK Ejiji Temperature
- TOP
- TSUKUYOMI SERIES
- Neo Tsukuyomi LED 20W BACK Ejiji Temperature
TSUKUYOMI-20W-BK
Neo Tsukuyomi LED 20W BACK Ejiji Temperature
¥13,600
[difference from the old model]
・Product design incorporating lines
The design has been renewed by adding a continuous line from the heat radiation fin to the resin part.
・Lid with a stone-like design
We have changed the design to have an impact that changes the common sense of conventional plant growing lights.
・Use parts with high durability
The parts inside the power supply have been changed to more durable ones.
[Appearance of light: slightly reddish warm color]
Designed mainly for red wavelengths, it can produce more vivid greens of aquarium aquascapes and foliage plants.
Red wavelength has the best photosynthetic efficiency, vegetables, foliage plants, aquariums, succulents, tuberous plants, etc..
It is a light that boasts a high growth effect in all plant growth.
It is also effective in blooming flowers.
[body color] black [color temperature] about 4000K ~5000K
[Color rendering index] High color rendering Ra97
● Illuminance, photon flux density (when irradiation distance is 40 cm)
[Illuminance] 21690lux
[PPFD] 507μmol m-2 s-1
[Total luminous flux] 2098lm
[Lumen] 2098lm
[Base] E26
[Base] E26 [Power consumption] 20W
[Low power] 20W [Rating life (h)] 20000 hours
【 Rated life 】 20000hours
*The rated life is a design value, not a guaranteed value.
●Dimensions [Total length] 140mm
[Outline] 120mm
[mass] 350 g [Rated Voltage (V)] 100~240
[Indoor use] 50-60Hz
[Recommended irradiation distance] 40cm~150cm
[Weight] 14.1 oz
●Electricity bill for one month
12 hours irradiation per day x 31 days = about 200 yen
(Calculated at a unit price of 27 yen per kWh)
Achieves color rendering properties close to those of sunlight.
Plants and water look amazingly beautiful.
The way plants grow is similar to how they grow under sunlight.
●Precautions before using this product *Please be sure to read before purchasing.
●The following devices cannot be used.
*It may cause damage or malfunction.
○ Never use a light bulb or circuit with a remote control.
○ Please do not use the device with a dimming function (brightness can be adjusted). (Including step dimming fixtures) (Cannot be used even when lit at 100%)
○Never use emergency lighting fixtures, guide lighting fixtures, HID lamp (mercury lamp, etc.) fixtures, and fixtures with motion sensors for incandescent lamps.
(In addition, depending on the type of equipment used, there may be cases where it cannot be used due to dimensional, thermal, or other conditions.)
○Never use with insulation construction equipment (SB, SGI, SG type display equipment).
○ Be sure to use a device that is compatible with the wattage of this product or higher.
(If the lamp is 20W, please check if the fixture is compatible with 20W or more. If it is not compatible, the lamp will break down.)
○It cannot be used with lighting fixtures with different caps.
○ Do not use sealed fixtures or fixtures that are close to sealed fixtures, as the temperature will increase and the lamp life will be shortened. Use open instruments.
● Precautions for use * Please be sure to check.
○It cannot be used outdoors. (Cannot be used with closed instruments)
○ Do not use the product in a place where it may be exposed to water droplets or in high humidity.
○ Since the way light spreads (light distribution) differs from light bulbs, depending on the type of fixture (lamp installed sideways or diagonally, etc.), appropriate light distribution and brightness may not be obtained. .
○ Do not use the lamp where the ambient temperature exceeds 40°C. The recommended ambient temperature for use is (-5°C to 40°C). Although it will light even at temperatures below -5°C, it is not designed for low temperatures or waterproofing, so it cannot be used in environments where condensation occurs.
○ Please use the displayed voltage. It may cause a short life or non-lighting.
○Because LED light sources vary in light color and brightness, even products with the same model name may differ in light color and brightness.
○ Life is the time until the luminous flux drops to 70%. The display shows the design life and does not guarantee the life of the product. The LED chip will not burn out, but the power supply board may malfunction and turn off depending on the usage conditions.
○ Do not use the device near objects that become hot (stoves, gas ranges, etc.) or in damp locations. It may cause fire or electric shock.
■Failures caused by continuous operation for 24 hours are not covered by the warranty.
Continuous operation for 24 hours increases the likelihood of failure. Be sure to rest for 30 minutes every 12 hours. If it has been operated continuously for more than 12 hours, please wait for at least 30 minutes before restarting operation.
・Product design incorporating lines
The design has been renewed by adding a continuous line from the heat radiation fin to the resin part.
・Lid with a stone-like design
We have changed the design to have an impact that changes the common sense of conventional plant growing lights.
・Use parts with high durability
The parts inside the power supply have been changed to more durable ones.
[Appearance of light: slightly reddish warm color]
Designed mainly for red wavelengths, it can produce more vivid greens of aquarium aquascapes and foliage plants.
Red wavelength has the best photosynthetic efficiency, vegetables, foliage plants, aquariums, succulents, tuberous plants, etc..
It is a light that boasts a high growth effect in all plant growth.
It is also effective in blooming flowers.
[body color] black [color temperature] about 4000K ~5000K
[Color rendering index] High color rendering Ra97
● Illuminance, photon flux density (when irradiation distance is 40 cm)
[Illuminance] 21690lux
[PPFD] 507μmol m-2 s-1
[Total luminous flux] 2098lm
[Lumen] 2098lm
[Base] E26
[Base] E26 [Power consumption] 20W
[Low power] 20W [Rating life (h)] 20000 hours
【 Rated life 】 20000hours
*The rated life is a design value, not a guaranteed value.
●Dimensions [Total length] 140mm
[Outline] 120mm
[mass] 350 g [Rated Voltage (V)] 100~240
[Indoor use] 50-60Hz
[Recommended irradiation distance] 40cm~150cm
[Weight] 14.1 oz
●Electricity bill for one month
12 hours irradiation per day x 31 days = about 200 yen
(Calculated at a unit price of 27 yen per kWh)
Achieves color rendering properties close to those of sunlight.
Plants and water look amazingly beautiful.
The way plants grow is similar to how they grow under sunlight.
●Precautions before using this product *Please be sure to read before purchasing.
●The following devices cannot be used.
*It may cause damage or malfunction.
○ Never use a light bulb or circuit with a remote control.
○ Please do not use the device with a dimming function (brightness can be adjusted). (Including step dimming fixtures) (Cannot be used even when lit at 100%)
○Never use emergency lighting fixtures, guide lighting fixtures, HID lamp (mercury lamp, etc.) fixtures, and fixtures with motion sensors for incandescent lamps.
(In addition, depending on the type of equipment used, there may be cases where it cannot be used due to dimensional, thermal, or other conditions.)
○Never use with insulation construction equipment (SB, SGI, SG type display equipment).
○ Be sure to use a device that is compatible with the wattage of this product or higher.
(If the lamp is 20W, please check if the fixture is compatible with 20W or more. If it is not compatible, the lamp will break down.)
○It cannot be used with lighting fixtures with different caps.
○ Do not use sealed fixtures or fixtures that are close to sealed fixtures, as the temperature will increase and the lamp life will be shortened. Use open instruments.
● Precautions for use * Please be sure to check.
○It cannot be used outdoors. (Cannot be used with closed instruments)
○ Do not use the product in a place where it may be exposed to water droplets or in high humidity.
○ Since the way light spreads (light distribution) differs from light bulbs, depending on the type of fixture (lamp installed sideways or diagonally, etc.), appropriate light distribution and brightness may not be obtained. .
○ Do not use the lamp where the ambient temperature exceeds 40°C. The recommended ambient temperature for use is (-5°C to 40°C). Although it will light even at temperatures below -5°C, it is not designed for low temperatures or waterproofing, so it cannot be used in environments where condensation occurs.
○ Please use the displayed voltage. It may cause a short life or non-lighting.
○Because LED light sources vary in light color and brightness, even products with the same model name may differ in light color and brightness.
○ Life is the time until the luminous flux drops to 70%. The display shows the design life and does not guarantee the life of the product. The LED chip will not burn out, but the power supply board may malfunction and turn off depending on the usage conditions.
○ Do not use the device near objects that become hot (stoves, gas ranges, etc.) or in damp locations. It may cause fire or electric shock.
■Failures caused by continuous operation for 24 hours are not covered by the warranty.
Continuous operation for 24 hours increases the likelihood of failure. Be sure to rest for 30 minutes every 12 hours. If it has been operated continuously for more than 12 hours, please wait for at least 30 minutes before restarting operation.