• TOP
  • OTHER
  • 【Clamp Ring】|Dedicated Part for Clamp Lamp Socket
【Clamp Ring】|Dedicated Part for Clamp Lamp Socket
【Clamp Ring】|Dedicated Part for Clamp Lamp Socket
【Clamp Ring】|Dedicated Part for Clamp Lamp Socket
【Clamp Ring】|Dedicated Part for Clamp Lamp Socket
【Clamp Ring】|Dedicated Part for Clamp Lamp Socket
【Clamp Ring】|Dedicated Part for Clamp Lamp Socket
【Clamp Ring】|Dedicated Part for Clamp Lamp Socket
【Clamp Ring】|Dedicated Part for Clamp Lamp Socket
【Clamp Ring】|Dedicated Part for Clamp Lamp Socket
【Clamp Ring】|Dedicated Part for Clamp Lamp Socket
【Clamp Ring】|Dedicated Part for Clamp Lamp Socket
【Clamp Ring】|Dedicated Part for Clamp Lamp Socket
【Clamp Ring】|Dedicated Part for Clamp Lamp Socket
【Clamp Ring】|Dedicated Part for Clamp Lamp Socket
【Clamp Ring】|Dedicated Part for Clamp Lamp Socket
【Clamp Ring】|Dedicated Part for Clamp Lamp Socket
【Clamp Ring】|Dedicated Part for Clamp Lamp Socket
【Clamp Ring】|Dedicated Part for Clamp Lamp Socket
【Clamp Ring】|Dedicated Part for Clamp Lamp Socket
【Clamp Ring】|Dedicated Part for Clamp Lamp Socket

BCL-R-21-BK

【Clamp Ring】|Dedicated Part for Clamp Lamp Socket

¥990

↑ ↓

Buyers may be responsible for paying customs duties on orders. Please note

Contact

【Product Details】

[Dedicated Part for Clamp Lamp Socket]

This is a custom accessory that allows you to convert the clamp section of the Clamp Lamp Socket into a ring-type mount.
It is used when installing the light onto the dedicated pole stand.

● The following products (sold separately) are required for use:

[Clamp Lamp Socket]
A clamp-type integrated cord socket.

[POLE STAND]
A stand designed exclusively for use with the Clamp Ring.

● The lighting accessory “Clamp Lamp Socket” can be converted from a clamp mount to a ring-type socket called “Clamp Ring.” The “POLE STAND” is specifically designed for installation after converting to the “Clamp Ring.” Damage caused by using non-compatible products is not covered under warranty. Thank you for your understanding.
● “Clamp Lamp Socket” and “POLE STAND” are sold separately and are not included.

【Specifications】

■ Product Information
External Dimensions: 51 × 25 mm
Compatible Pole Width: 18–21 mm
Weight: Approx. 35.7 g
Maximum Load Capacity: Up to 800 g
Material: Steel
Color: Black / White

【Cautions】

● When tightening the main shaft knob during clamp replacement, make sure to tighten it firmly until it no longer turns. Failure to do so may result in the fixture falling. Please also check periodically to ensure it has not loosened.

● Do not install bulbs exceeding the maximum load capacity. Also confirm the material and strength of the installation surface in advance. Failure to do so may result in falling or tipping, which could cause injury.

● Do not install in unstable or vibration-prone locations. This may result in falling or tipping and could cause injury.

● Be careful not to pinch fingers, hands, or clothing in the movable parts, as this may cause injury.

● Although the maximum load capacity is 800 g, when using lights weighing approximately 800 g (such as ROKI-Octagon), please remove the rubber part on the main shaft before use.
Detailed removal instructions are provided on the “Clamp Lamp Socket” product page on our website.

Even if a situation is not specifically described above, accidents may occur depending on conditions. Please read all precautions carefully and use the product correctly and safely.


USER REVIEW

商品レビュー
名前を入力して下さい メールアドレスを入力して下さい
タイトルを入力して下さい
本文を入力して下さい 本文が短すぎます 本文が長すぎます。4000文字以内で入力して下さい
»
* 必須入力。HTMLタグは削除されます。
レビューを送信していただきありがとうございました。
レビューの送信中に問題が発生しました。しばらく経ってから再度お試しください。
0件のレビュー